Products related to Sensor:
-
Temperature Sensor
This probe is designed for general use such as the temperature measurement of air, surface or liquids.Range -20 to 120C, res 0.2CSafe for use in all readily available classroom chemicalsMinimum recommended recording interval is 10 ms for the
Price: 60.80 £ | Shipping*: 0.00 £ -
Sound Sensor
Suitable for investigating the sound level in normal working environments, and very low levels such as the dawn chorus. It has ranges for sound waves either in dB or in KPa. The sensor has a fast response two sensors placed a few metres apart can be
Price: 91.12 £ | Shipping*: 0.00 £ -
Wall or hanging mount outdoor heater with PIR sensor 426695
Colour Black.Depth mm 1270.Dimensions H x W x D mm 188 x 195 x 1270.GTIN 5059908059677.Height mm 188.IP Rating IP55.Material Steelquartz.Mounting Type CeilingWall mounted.No. of Heat Settings 3.Power Watt 2800.Voltage V 240.Weight kg 7.8.Width mm
Price: 337.37 £ | Shipping*: 0.00 £ -
Yale Outdoor Motion Sensor - 12m Motion Detection Range; Pet-Friendly;
Outdoor Motion SensorThe Yale Outdoor Motion Sensor will detect any motion outside your home within 12 metres. Optional pet-friendly feature and customisable detection sensitivity. Enhanced protection rangeEquipped to detect motion outside your home,
Price: 145.60 £ | Shipping*: 0.00 £
-
Why is my sensor bar not lighting up?
There could be several reasons why your sensor bar is not lighting up. It could be due to a loose or damaged connection, a faulty power supply, or a problem with the sensor bar itself. Check the connections and make sure everything is securely plugged in. If the power supply is working properly, you may need to replace the sensor bar. Additionally, make sure there are no obstructions blocking the sensor bar's view of the Wii remote.
-
Is the resistance of the outdoor sensor defective?
It is possible that the resistance of the outdoor sensor is defective if it is not providing accurate readings or if it is not functioning properly. To determine if the resistance is defective, you can use a multimeter to measure the resistance of the sensor and compare it to the expected value. If the measured resistance is significantly different from the expected value, then it is likely that the sensor is defective and may need to be replaced. Additionally, checking for any physical damage or corrosion on the sensor can also help determine if it is defective.
-
Is there an outdoor spotlight with motion sensor and timer?
Yes, there are outdoor spotlights with motion sensors and timers available in the market. These spotlights are designed to turn on when motion is detected and can be set to stay on for a certain amount of time before automatically turning off. They are a great option for enhancing security and providing convenient lighting for outdoor spaces. You can find these spotlights at hardware stores, home improvement stores, and online retailers.
-
What is defective, the outdoor sensor of my weather station?
If the outdoor sensor of your weather station is defective, it may not be accurately measuring and transmitting data such as temperature, humidity, or wind speed. This can result in inaccurate weather readings and forecasts. It is important to troubleshoot the sensor by checking its power source, connections, and placement to ensure it is functioning properly. If the issue persists, it may be necessary to replace the sensor to restore the accuracy of your weather station.
Similar search terms for Sensor:
-
Heart Rate Sensor
A Heart Rate Sensor for the SensorDisc Datalogger.The heart rate sensor for connection to the SensorDisc Datalogger is capable of measuring the human pulse between 30-200 beats per minute. The Sensor is Ideal for experiments comparing students pulse
Price: 93.70 £ | Shipping*: 0.00 £ -
Mangetic Field Sensor
A Magnetic Field Sensor for the Philip Harris SensorDisc. The sensor connects to the Philip Harris SensorDisc Datalogger via the Micro-USB external probe socket and its sensitive range can detect the earths magnetic field, while the wide range is
Price: 90.14 £ | Shipping*: 0.00 £ -
Advanced Light Sensor
The advanced light sensor can measure from 0.5 to 100,000 lux, with relative accuracy at all levels. It is ideal for experiments needing accurate quantitative results at all incident light levels. This sensor can select either fast or slow response
Price: 92.01 £ | Shipping*: 0.00 £ -
APC Temperature Sensor 8APAP9335T
Universal sensor that monitors temperature in your Data Center or Network Closet. Includes installation guide, temperature sensor.RJ45 - automatically detected by compatible NetBotz appliances and easily extended with standard CAT56 cable to 100
Price: 92.41 £ | Shipping*: 0.00 £
-
How do I connect an outdoor light with integrated motion sensor?
To connect an outdoor light with an integrated motion sensor, you will first need to turn off the power to the light at the circuit breaker. Next, remove the existing light fixture and disconnect the wires. Then, connect the wires from the new light fixture with integrated motion sensor following the manufacturer's instructions. Finally, secure the new light fixture in place and turn the power back on to test the motion sensor.
-
How can outdoor pole lights be retrofitted with a motion sensor?
To retrofit outdoor pole lights with a motion sensor, you will need to purchase a motion sensor kit specifically designed for outdoor lighting. The kit typically includes a motion sensor, wiring, and instructions for installation. First, turn off the power to the pole lights. Then, follow the instructions provided in the kit to connect the motion sensor to the existing wiring of the pole lights. Once the sensor is installed, adjust the settings to customize the sensitivity and duration of the light when motion is detected.
-
How do I synchronize two outdoor lights with a motion sensor?
To synchronize two outdoor lights with a motion sensor, you will need to ensure that both lights are compatible with the same type of motion sensor. Once you have confirmed compatibility, you can wire the motion sensor to both lights in parallel so that they both activate when motion is detected. Make sure to follow the manufacturer's instructions for wiring and installation to ensure proper synchronization and functionality. Additionally, you may need to adjust the sensitivity and range settings on the motion sensor to ensure that both lights are triggered simultaneously.
-
How can you bypass an outdoor spotlight with a motion sensor?
One way to bypass an outdoor spotlight with a motion sensor is to cover the sensor with a material that blocks its view, such as tape or a small piece of cardboard. Another method is to adjust the angle of the sensor so that it does not detect motion in the area you want to bypass. Additionally, you can try to find the power source for the spotlight and temporarily disconnect it to disable the motion sensor. However, it's important to note that tampering with outdoor lighting may be illegal and could pose safety risks, so it's best to consult with a professional before attempting any of these methods.
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases.